February 13-15, 2019
AFCEA / WEST 2019
San Diego, California



P/N: ETI0020-1001

PDU Specs

 
AC OUTPUT
Output voltage: 120 VAC true sinewave
Output rating: 1000 watts continuous
Output voltage regulation: 3.0% static regulation of nominal
-10% to +4.0% dynamic
Overload surge capacity: 1500 watts surge for 5 seconds
Output protection: Overcurrent protection
Harmonic distortion: Less than 3.0% THD
Output frequency: 60 0.5% crystal controlled
Operational status Status LCD display, load level, input volts/amps
Audible alarm
DC INPUT
Input voltage selection: Nominal 24 VDC
Input voltage tolerance: 20-32 VDC
Input control/protection: 2-pole DC Circuit Breaker, under/over voltage and input reverse protection
Input power connection: (1) NATO Slave female connector
(1) Anderson Power Pole
Input power cable: (1) 10' Anderson to NATO cable, 2/0, 2 conductor
DISTRIBUTION PANEL
Output circuits: Six outputs standard
Output control: GFCI, Ground Fault Circuit Interrupter
Optional panel switches or breakers
Optional remote interlock ON/OFF control
Output receptacles: NEMA 5-15R straight blade standard
MECHANICAL
Dimensions ( H x D x W ): 19 in (49 cm) x 20 in (51 cm) x 16.4 in (42 cm)
Cooling type: Fan. thermostatically controlled, overtemp protection
Unit weight:
    Inverter only
    Cable only
    Inverter with Cable together


50
lb. (23 kg)
15 lb. (7 kg)
65 lb. (30 kg)

ENVIRONMENTAL
Storage temperature: -22 to 158 F ambient (-30 to 70 C), lower/higher optional
Operating temperature: 32 to 140 F ambient (0 to 60 C )
Operating humidity: 0 to 95% relative humidity (non-condensing)
Storage elevation: Up to 40,000 ft (12,192 m)
Operating elevation: Up to 10,000 ft (3,048 m)
STANDARDS
United States: Meets UL-1741 and 458 including marine supplement
KKK-A-1822D for use on ambulances
ABYC E8, E9 and A25 for marine applications
Canada: CSA 107.1 safety requirements
EMI Protection: EMI/RFI FCC Part 15, Class B standard
OPTIONAL ACCESSORIES
  Input Cable Kits,  Power Distribution Units, Transport Cases
Product Inquiry
*(denotes required field)
Contact ETI by mail at:
Energy Technologies, Inc.
219 Park Avenue East
Mansfield, OH 44902-1845
USA

Contact ETI by phone or fax:
Voice: 419-522-4444
FAX: 419-522-4466